2017 FIAT 500e Brake Specials

Most per-axle brake jobs are completed the same day at LHM Dodge Ram Tucson.

Turnaround depends on pad condition, rotor thickness, and parts availability, but our team targets efficient, same-day service to keep you moving in Tucson. We’ll confirm timing after inspection and keep you updated. Booking ahead helps us stage parts and minimize downtime.

• Same-day service targeted after on-vehicle inspection
• Upfront timeline provided by your advisor
• Schedule service to reserve your spot

A professional brake service includes pad measurement, rotor thickness checks, hardware service, a brake fluid check, lubrication of slides, and a road test.

Our certified team in Tucson follows a consistent inspection and service process designed for reliable stopping and even pad wear on the 2017 FIAT 500e. You’ll get clear measurements and recommendations before any work begins.

• Pad and rotor measurements documented on your inspection
• Caliper hardware serviced; slides cleaned and lubricated
• Brake fluid level/condition checked and road test performed

Four common signs are squealing wear indicators, longer stopping distances, pedal pulsation, and grinding or a red brake warning light.

If you notice any of these, book an inspection before rotor damage or extended stopping distances put you at risk around Tucson traffic. Our technicians will measure pad thickness and rotors against factory specs and review next steps with you.

• Book an inspection at the first squeal or pulsation
• Grinding usually means pads are at or near metal
• Schedule service for a same-day inspection slot

Replace both only if rotors are at or below minimum thickness or show heat spots, cracks, or deep grooves; otherwise pads alone may be approved.

We measure rotor thickness and runout, then compare to the minimum specification. If rotors are healthy, replacing pads and servicing hardware is typically sufficient. If they’re below spec or damaged, pads and rotors are replaced together to ensure safe braking and proper bed-in.

• Rotors measured and documented against factory spec
• Advisor explains options: pads-only vs. pads+rotors
• Road test verifies pedal feel and stopping performance

Dealers install OEM-spec pads and check rotors to factory specs, while independents may offer lower-cost aftermarket partsthe right choice depends on your priorities.

At Larry H. Miller Dodge RAM FIAT Tucson, certified technicians service the 2017 FIAT 500e with OEM-spec components and documented measurements. Independent shops can be a fit for budget needs, but verify pad formulation, hardware, and rotor measurements are included.

• OEM-spec pads and documented rotor measurements
• Brake fluid check and post-repair road test included
• Review offers on our service specials page

Brake pads and rotors are wear items and are generally not covered by new-vehicle warranties; defects may be reviewed under applicable coverage.

If you suspect a defect rather than normal wear, our certified team can inspect and advise on eligibility. Warranty work typically requires documentation and service at a certified facility, which we provide in Tucson.

• Inspection documents pad and rotor condition
• Advisor reviews any applicable warranty coverage
• Keep records to support coverage evaluations

Noworn or grinding brakes increase stopping distance and can quickly damage rotors, raising repair costs.

If you hear grinding or feel pulsation, avoid freeway speeds and heavy traffic until inspected. We can often inspect and advise the same day in Tucson, then prioritize safe, documented repairs using OEM-spec parts.

• Grinding = urgent: possible rotor damage
• Pulsation suggests rotor thickness variation
• Schedule service for the earliest inspection

Call (520) 462-9486 or use our online schedule service tool to book your appointment.

Online scheduling lets you choose a time that fits, and calling connects you with an advisor for quick assistance. We’ll confirm details for your 2017 FIAT 500e and provide an estimate after inspection.

• Address: 4220 E 22nd St, Tucson, AZ 85711
• Service hours: Mon–Fri 7:00 AM–6:00 PM; Sat 7:00 AM–4:00 PM
• Check current service specials before you book

Yescurrent brake offers are posted on our service specials page.

Before scheduling your 2017 FIAT 500e, review available coupons to see if a brake inspection or pad replacement offer applies. Bring or present the coupon at write-up so we can apply eligible savings.

• View and save coupons to your phone
• Confirm terms with your service advisor
• Schedule service to lock in your time

Every 2017 FIAT 500e brake visit begins with a visual inspection, pad thickness measurement, and rotor thickness/runout checks. Your technician services caliper hardware, cleans and lubricates slides, and verifies brake fluid level and condition. If pad replacement is approved, we install OEM-spec pads and required hardware, then complete a careful bed-in and road test to confirm pedal feel and stopping performance. You receive measurements and findings so you can make an informed decision. If youre comparing options, remember to ask whether rotor measurement, hardware service, fluid checks, and a documented road test are included. Ready to move forward? Call (520) 462-9486 or schedule service now.

We support 2017 FIAT 500e owners across greater Tucson with clear inspections and OEM-spec repairs. Frequent city stops and downhill stretches can increase heat and wear; an inspection helps catch issues before they affect stopping distance. Our advisors explain pad and rotor measurements, outline options (pads-only vs. pads+rotors), and review any current service specials that may apply. Visit us at 4220 E 22nd St, Tucson, AZ 85711, Monday–Friday 7:00 AM–6:00 PM and Saturday 7:00 AM–4:00 PM. To plan your visit, schedule service online or call (520) 462-9486 for assistance and directions.

The 2017 FIAT 500e is a mini compact hatchback with an electric powertrain, and its braking system is serviced using OEM-spec pads, rotors, and hardware validated to factory standards. Exact front and rear pad and rotor references are confirmed by VIN during your inspection, ensuring correct fit and performance. Your technician measures rotor thickness and runout and records pad thickness before recommending pads-only or pads-with-rotors. We also review applicable factory bulletins by VIN and test-drive to verify pedal feel and straight, confident stops. Bring your 2017 FIAT 500e to Larry H. Miller Dodge RAM FIAT Tucson in Tucson for an OEM-spec brake service — schedule service.