2020 Dodge Challenger Air Filter in Tucson, AZ

It sits inside the engine bay airbox on the intake side, accessible under the hood.

The 2020 Dodge Challenger routes intake air through a sealed airbox before it reaches the 5.7L V8 throttle body. Open the airbox clips or screws to access the rectangular filter element. If you prefer professional service, our Tucson team can inspect, replace, and reseal the housing during a same-day appointment.

• Engine bay airbox on the intake side
• Tool-free or basic hand tools for most airbox lids
• We also inspect the intake duct and seals for leaks

The engine filter protects the 5.7L V8s intake air, while the cabin filter cleans the HVAC air you breathe.

On the 2020 Dodge Challenger, the engine filter sits in the under-hood airbox to safeguard combustion, sensors, and performance. The cabin filter is part of the HVAC system to reduce dust, pollen, and debris inside the coupe. Both support comfort and longevity but serve different systems.

• Engine filter: intake protection and performance
• Cabin filter: HVAC airflow and in-cabin air quality
• Different locations, sizes, and service intervals

Common signs include reduced power, poorer fuel economy, rough idle (engine), weak airflow, and musty odors (cabin).

The 2020 Dodge Challenger can feel sluggish when the engine filter is restricted, especially noticeable during acceleration with the 5.7L V8. A dirty cabin filter reduces blower output and may add odors or haze on the glass. Tucson dust can accelerate loading, so periodic inspections help.

• Engine: hesitation, lower MPG, throttle lag
• Cabin: weak vents, odor, increased window fogging
• Visible dirt on filter pleats or dark coloration

The engine filter is usually DIY-friendly, while cabin filters can require trim access and benefit from dealer inspection.

Many owners of the 2020 Dodge Challenger can swap the engine filter using basic tools. Our Tucson shop adds value with an intake/MAF visual check, airbox sealing, and OEM-spec parts. For cabin filters, our technicians avoid clip damage and confirm HVAC door operation. You can schedule service or review service specials first.

• DIY engine filter: straightforward airbox access
• Dealer: MAF/intake checks and correct fitment
• Cabin filter: trim access and HVAC function check

Most visits are completed during a standard service appointment at 4220 E 22nd St in Tucson.

Our certified team coordinates engine and cabin filter service with your maintenance visit for efficiency. While you relax in our lounge, we perform inspections, replacements, and quality checks. For availability, use our online schedule service tool or call (520) 462-9486.

• Same-day appointments available by scheduling
• Coordinated with oil change or tire rotation
• Post-service complimentary wash is included

Yeswe stock and install MOPAR OEM-spec filters for Dodge vehicles.

For the 2020 Dodge Challenger, OEM-spec filtration helps preserve sensor accuracy and airflow to the 5.7L V8 while maintaining cabin air quality. Our MOPAR-trained technicians match the correct element and seal the housing to prevent bypass dust. Check our service specials before you schedule service.

• MOPAR OEM-spec engine and cabin filters
• Proper airbox sealing and fitment verification
• Intake/MAF visual inspection included

Follow the factory interval listed in your owners manual for the 5.7L V8.

Driving in and around Tucson can mean more dust and debris, which may require more frequent inspections for the 2020 Dodge Challenger. We recommend a quick check at each maintenance visit so you replace only when needed. Book a convenient time through our schedule service page.

• Factory interval: see owners manual guidance
• Dusty conditions can shorten service life
• We document filter condition at each visit

Use the cabin filter interval in your owners manual and adjust based on Tucson dust and pollen.

Cabin filters on the 2020 Dodge Challenger load faster during high-pollen seasons or with frequent construction-zone driving. If airflow weakens or odors persist, it may be time sooner. Well check it during routine service and advise with photos before replacement.

• Follow OEM interval; adjust for local conditions
• Replace sooner if airflow drops or odors appear
• See current service specials

Arizona dust, spring pollen, and monsoon debris can load filters quickly in the 2020 Dodge Challenger. Our certified team serves drivers throughout Tucson and nearby communities with factory procedures tailored to local conditions. With years of continuous operation in the area and a staff of certified technicians, we align service timing to your driving profile and inspect both engine and cabin filtration at each visit. You can find us at 4220 E 22nd St with easy access and comfortable amenities. For directions or to lock in a time, call (520) 462-9486 or use our online schedule appointment tool.

Our process for the 2020 Dodge Challenger starts with a visual inspection of the intake tract and airbox, followed by removal and evaluation of the engine filter. If replacement is warranted, we install an OEM-spec element and ensure the airbox seals properly. For the cabin, we access the HVAC housing, check door operation, and replace the filter if needed. A mass air flow (MAF) sensor visual is included to spot contamination early. Parts installed meet OEM-spec standards, and we provide complimentary multi-point inspection and a wash with each visit. To plan your visit, check our service specials and schedule service or call (520) 462-9486.

The 2020 Dodge Challenger with the 5.7L V8 uses an engine air filter sized for high airflow and proper sealing in the under-hood airbox, while the cabin filter is designed for the HVAC module to capture dust and pollen. OEM-spec MOPAR filtration helps maintain throttle response, sensor accuracy, and in-cabin comfort. If youve noticed reduced power or weak HVAC airflow, an inspection can confirm whether replacement is needed. Bring your 2020 Dodge Challenger to Larry H. Miller Dodge RAM FIAT Tucson in Tucson for OEM-spec filter service schedule service.